11
Changing Measurement
Settings
Each measurement has a setup menu in which you can
adjust all of its settings. You can enter a setup menu:
• via the measurement numeric - select the
measurement numeric to enter its setup menu.
For example, to enter the Setup ECG menu,
select the HR (heartrate) numeric.
•via the Main Setup SmartKey - if you want to
setup a measurement when the measurement is
switched off, use the Main Setup SmartKey
and select Measurements. Then select the
Measurement name from the popup list. With this
SmartKey you can access any setup menu in the
monitor.
Switching a Measurement
On and Off
When a measurement is off, its waves and numerics are
removed from the monitor’s screen. The monitor stops
data acquisition and alarming for this measurement. A
measurement automatically switches off if you
disconnect its measurement server. If you disconnect a
transducer, the monitor replaces the measurement
numeric with question marks.
1 Enter the measurement’s setup menu and select the
measurement.
2 Select the measurement name to toggle between on
and off. The screen display indicates the active
setting.
To Next Page
Loading...
Need help?
General
