Philips epiq 5 User Manual

Lists additional ultrasound training courses offered by Conquest Imaging.

Covers components receiving reflections and performing signal processing for ultrasound images.

Includes PC module, UI, audio, video, and master controller functions.

Describes the control panel, its inputs, outputs, and user controls.

Details various video output configurations like VIO, SVIO, and S-Video options.

Explains system power modes, power-up sequences, and power supply modules.

Details the main power supply module, its functions, and voltage distribution.

Defines DICOM, covers network setup, DNS, and Ethernet/wireless connections.

Details setup for DICOM printers, servers, media, and storage commit.

Explains export compression, structured reports, native data, and 3D data export.

Discusses hard drive capacity warnings, status messages, and auto-delete configuration.

Guides on creating system backups and restoring settings from media or defaults.

Outlines tests for hardware/firmware, including exam-start, imaging, measurement, and system tests.

Covers testing peripherals, filter cleaning, caster maintenance, and surface cleaning.

Procedures for touch screen calibration and trackball inspection/cleaning.

Discusses grounding, power connections, and patient contact device safety.

Explains EMI effects, sources, and measures to reduce interference.

Details ESD causes, effects, and precautions like wrist straps and mats.

Covers fire safety practices, battery handling, and environmental considerations.

Guides on diagnosing power-up failures, checking motherboard components and LEDs.

Explains LED indicators on VPPM, Channel Board, and Power Regulator Board.

Steps to isolate the control panel and use the Minimal Test Environment (MTE).

Emphasizes safety during maintenance, including power down and ESD precautions.

Instructions for opening E-Module, accessing rear I/O, and locating motherboard battery.

Details battery replacement, BIOS settings verification, and resetting the BIOS.

Procedures for display assignment after video module or graphics card replacement, and iButton handling.

Guides on manually adjusting the control panel's rotation and height.

Instructions for adjusting monitor arm buoyancy and swivel knuckle tension.

Lists factory-defined BIOS parameters for SuperMicro motherboards.

Lists factory-defined BIOS parameters for BCM motherboards.

Checklist for connecting DICOM devices and required network information.