EPIQ 5 & 7 Training Manual
© 2016 Conquest Imaging
Testing Annotations and Body Markers
Successful execution of this test implies that the annotation, text-
erase, and body marker functions are operational.
Test the annotation and body marker functions:
1. Press 2D and obtain a 2D image.
2. Press ABC Label. Verify that the ABC Label touch screen appears.
3. Use the trackball to position the cursor on the display, or touch
Home to return the cursor to the home location.
4. To add text, type the text you want to appear on the display.
5. To display predefined labels touch a label control to display its text.
6. To display an arrow, press the Arrow quick key, position the arrow
with the trackball, and then click to fix the position.
7. To erase text, touch Erase Last to erase one word at a time, or
touch Erase All to erase all of the annotation.
8. Touch Body Markers. Verify that a body marker appears on the
display.
9. Touch Erase Body Mark to erase the body mark.
10. Press ABC Label to exit the annotation mode.
Measurement and Analysis Test
Successful execution of the following steps indicates that Freeze,
Measure, Report, Pointer, and the trackball buttons work.
To Next Page
Loading...