Need help?Do you have a question about the Philips Respironics EverFlo and is the answer not in the manual?
General| Device Type | Oxygen Concentrator |
|---|---|
| Weight | 31 lbs (14 kg) |
| Outlet Pressure | 5.5 PSI |
| Operating Temperature | 55°F to 90°F (12°C to 32°C) |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Frequency | 60 Hz |
| Flow Rate | 0.5 to 5 L/min |
| Oxygen Concentration | 93% ± 3% |
| Sound Level | 45 dBA |
| Dimensions | 23 in (584 mm) H x 15 in (381 mm) W x 9.5 in (241 mm) D |
| Power Consumption | 350 W |
| Operating Humidity | Up to 95% non-condensing |
| Altitude | 0 to 7500 feet (0 to 2286 m) |
| Input Voltage | 120 V AC |
| Alarm Indicators | Power failure, Low oxygen purity, No flow |
Icons for safety, compliance, and operational status indicators.
Symbols related to power status and equipment protection.
Glossary of technical abbreviations like LED, LPM, OPI.
Specifies the device's purpose for providing supplemental oxygen.
Describes the device's function and how it concentrates oxygen.
Identifies key components of the oxygen concentrator.
Lists approved accessories and replacement parts for the device.
Highlights potential hazards to the operator or patient.
Warns about potential damage to the equipment.
Provides instructions for cleaning the exterior and filter door of the device.
States that the device has no user-serviceable parts and requires authorized servicing.
Provides contact information for service and support.
Describes audible alarms and LED indicators on the device.
Lists common problems, their causes, and recommended solutions.
Details operating and storage conditions for temperature, humidity, and altitude.
Lists the device's dimensions and weight.
Lists standards the device conforms to (IEC, ISO).
Specifies voltage, wattage, and frequency for different model numbers.
Details oxygen concentration levels and flow rate requirements.
Lists sound levels (dBA) for different model groups.
Classifies the concentrator according to IEC standards and usage.
Provides guidance on proper disposal of the device.
Information on device emissions and their intended environment.
Information on device immunity to electromagnetic fields.
Guidelines for safe distances from RF equipment to prevent interference.
To Next Page