Need help?Do you have a question about the Philips REMstar Auto A-Flex and is the answer not in the manual?
General| Pressure Range | 4-20 cm H2O |
|---|---|
| Power Supply | 100-240V AC, 50/60 Hz |
| Altitude Compensation | Automatic |
| Display | LCD Screen |
| Mode of Operation | Auto-Adjusting (Auto-CPAP) |
| Ramp Time | 0 to 45 minutes (5-minute increments) |
| Flex Pressure Relief | A-Flex |
| Humidification | Optional integrated humidifier |
| Weight | 3 lbs |
| Data Storage Capacity | SD Card |
Adjusting Flex pressure relief level for exhalation comfort.
Controlling System One humidity feature for mask comfort.
Setting the initial pressure for the ramp feature.
Selecting correct tubing size for device compatibility.
Adjusting pressure relief based on mask resistance.
Displays peripheral data from SD card or modem.
Displays compliance data and average therapy hours.
Displays session counts, large leak percentages.
Displays Apnea/Hypopnea Index (AHI) and periodic breathing.
Shows the average pressure at which 90% of session time occurred.
Explains alert signals, priorities, and visual indicators.
Indicates device failure requiring immediate operator response.
Signals a mask leak or disconnection issue requiring prompt attention.
Indicates the device has automatically shut off due to mask removal.
Signals a malfunction or issue with the humidifier function.
Notifies users for reminders or messages from home care provider.
Confirms SD card prescription acceptance or rejection.
Alerts for incorrect SD card insertion or when the card is full.
Indicates data is being transferred to the SD card.
Alerts for corrupt SD cards or errors during removal.
Indicates modem status, successful or unsuccessful calls.
Resolves issues related to device power and airflow not starting.
Addresses erratic display and non-functional ramp feature.
Troubleshoots issues with airflow temperature and perceived pressure.
Instructions for connecting and using a humidifier with the device.
Guidance on using the SD card for data recording and transfer.
Important warnings and instructions for using supplemental oxygen.
Instructions for operating the device using a DC power source.
Guidelines for using the device during airline travel.
Details on operating temperature, humidity, dimensions, and weight.
Lists compliance standards and IEC 60601-1 classification.
Information on power consumption, fuses, and noise levels.
Specifies pressure increments and stability parameters.
To Next Page
