Philips epiq 5 - Hard Drive Management

EPIQ 5 & 7 Training Manual
© 2016 Conquest Imaging
38
Append Given Name with One of the Following DNS Suffixes
(In Order) and add one or more DNS suffixes.
 Click Save and close the DNS Settings tab.
DICOM Device/Server Configuration
Procedures
The following sections describe the setup and configuration of DICOM
servers and devices such as printers, media.
Aquire1 and Aquire2
Before you proceed with setting up connections to devices and
servers the desired functions of Aquire1 and Aquire2 should be
determined. Each of these aquistion modes can be assigned different
servers (default or backup), different printers that are connected to
the network, or other media devices such as DVD recorders.
DICOM Printer Configuration
To add and verify a DICOM printer:
 Press Support and click the Network/DICOM tab.
 Click DICOM Settings.
 Under DICOM Services Configuration, click Add.
 On the Device Type menu, select DICOM Printer.
 Configure the printer by entering the following required
information:
 Device Name
 AE Title
 Port Number
 Network Address
 Click Printer Setup  Select the Printer Manufacturer/Model
Name.
 Confirm the printer settings.
Application Entity (AE) is
a node in a DICOM
network.
Note: AE Title is case
sensitive.