13
Changing wave speed for a channel
1 Enter the Wave menu for a measurement by
selecting its wave.
2 Select Change Speed.
3 To set the speed to the wave group speed, select
RespiratorySpeed or Global Speed.
To set an individual channel speed, select a numeric
value from the list of available speeds to override the
wave group speed setting and set the speed for the
individual wave channel on the monitor Screen.
The wave channel speed is independent of the wave
(label) depicted in the channel, if you change the
wave, the new wave will retain the set channel
speed.
Changing Monitor Settings
• To change monitor settings such as date and time,
brightness, or QRS tone volume, select the
Main Setup SmartKey and then select the
setting you want to change, or select User
Interface to enter a submenu where you can
change user interface settings.
To Next Page
Loading...