1 Remove the shaving head (B) from the appliance (fig. 11) to clean
the hair chamber and the shaving head.
2 Rinse the hairs off the shaving head (fig. 12) and the appliance
(fig. 13).
3 Put the shaving head back onto the appliance ('click').
From time to time
Once a year in case of normal use.
1 Remove the shaving head (B) from the appliance (fig. 11).
2 Release the shaving foil unit from the trimmer unit (1) and
separate the two units (2) (fig. 14).
3 Brush the shaving foil and the cutter block carefully (fig. 15).
4 Place the shaving foil unit on a solid and flat surface and press the
trimmer unit back onto the shaving foil unit (fig. 16).
5 Put the shaving head back onto the appliance ('click').
Maintenance and replacement
1 Lubricate the shaving foil with a drop of sewing machine oil twice
a year (fig. 17).
If you use the Ladyshave twice a week or more, we advise you to
replace the shaving foil and cutter block every one to two years.
◗ The shaving foil may only be replaced with an original Philips
shaving foil (type HP2904).
◗ The cutter block may only be replaced with an original Philips
cutter block (type HP2907).
ENGLISH10
To Next Page
Loading...
Need help?
General
