Philips LatteGo EP3249 - Before first use; Setting up the machine; Activating the AquaClean water filter; Setting the water hardness

ON
2. Activating the AquaClean water filter (5 min.)
For more information see chapter 'AquaClean water filter'.
5 sec.
30 sec.
1 min.
ON
3 sec.
3. Setting the water hardness
See chapter 'Setting the water hardness' for step-by-step instructions. The default water hardness
setting is 4: hard water.
1 sec.
OFF
1 min.
3 sec.
=
3x
ON
4. Assembling LatteGo (specific types only)
CLICK
7
English
English