6 User manual
Installation3
Foot control 2210 with analog 3.1
connector
Connect the plug of the foot control to the 1
foot control socket of the transcription unit.
E Tip
The foot control 2210 also can be connected
to a PC in combination with the optional Philips
USB adapter 6220.
Foot control 2310 / 2320 / 2330 with 3.2
USB connector
Connect the foot control to a free USB port 1
on the PC.
Insert the installation CD in the CD-ROM 2
drive. The set-up program should start
automatically. If it does not, open the CD
contents in Windows Explorer and double-
click the autorun.exe file.
Click the 3 Install button.
Follow the on-screen instructions of the 4
set-up program to install the driver software
on the PC.
D Note
Administrator rights are required to install
the software. For more help, contact your
administrator.
To Next Page
Loading...
