Get started 8
Table of contents
Power on/off
1 To power on, press the f button until the display shows a short
animation [ ].
2 To power off, press the f button while the recorder is stopped
until the
display shows BYE.
Keypad lock (HOLD function)
1 Slide the HOLD switch up into the Hold position to lock the
keypad of the recorder.
• The display briefly shows ‘On Hold’ and turns off.
2 Slide the HOLD sw
itch down to the Off position to disengage the
keypad lock.
Using the Voice Tracer with a computer
As a USB mass storage device, the Voice Tracer offers a convenient
way to save, back up and move files. The Voice Tracer connects to a
computer using a USB connection and does not require special
software to be installed. The Voice Tracer is automatically displayed as
a removable drive.
D Notes
• Do not disconnect the Voice Tracer from the computer while files
a
re
transferred from or to the recorder. The record / play
indicato
r flashes orange, when data is being transferred.
• Do not format the drive of the Voice Tracer on a computer.
Formatting on the Voice Tracer uses the correct file system and
automatically creates the required folders.
To Next Page
Loading...
