EasyManua.ls Logo

Philips Lumea plus TT3003 - Support, Specifications & Troubleshooting; Troubleshooting Common Issues

Philips Lumea plus TT3003
128 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Guarantee and support
If you need information or support, please visit www.philips.com/support or
read the separate worldwide guarantee leaflet.
Technical specifications
Model TT3003
Rated voltage 100V-240V
Rated frequency 50Hz-60Hz
Rated input 7.5W
Protection against electric shock Class II <tekening>
Protections rating IP 30 (EN 60529)
Operating conditions Temperature: +15ºC to +35 °C
Relative humidity: 25% to 75%
Storage conditions Temperature: 0ºC to +60°C
Relative humidity: 5% to 95%
Intense pulsed light lamp Spectrum: >570nm
Lithium-ion battery 2 x 3.7 Volt
1500 mAh
Troubleshooting
This chapter summarizes the most common problems you could encounter
with the appliance. If you are unable to solve the problem with the
information below, visit www.philips.com/support for a list of frequently
asked questions or contact the Consumer Care Center in your country.
Problem Cause Solution
The appliance does not
work.
The rechargeable batteries
are empty.
Charge the appliance (see 'Charging').
The appliance is broken. Contact the Consumer Care Centre in
your country, your Philips dealer or a
Philips service centre.
The appliance suddenly
switches off.
The rechargeable batteries
are empty.
Charge the appliance (see 'Charging').
The adapter becomes
warm during charging.
This is normal. No action required.
24
English

Table of Contents

Related product manuals