Charging
Fully charge the batteries before you use the device for the rst time and
when the batteries are empty. Fully charging the batteries takes up to 1 hour
and 40 minutes. Charge the device when the charging light lights up orange
during use to indicate that the battery is low and will run out soon. Fully
charged batteries provide at least 130 ashes at light intensity 5. Fully charge
the device every 3 to 4 months, even if you do not use the appliance for a
longer time.
Charging the device:
1 Switch o the device.
2 Insert the small plug into the device and put the adapter in the wall
socket.
- The charging light ashes white to indicate that the appliance is
charging.
- When the batteries are fully charged, the charging light lights up white
continuously.
Notes: The adapter and the appliance feel warm during charging. This is
normal.
Note: This device is equipped with battery-overheat protection and does
not charge if the room temperature exceeds 40°C.
- Never cover the appliance and device during charging.
3 After charging, remove the adapter from the wall socket and pull the
small plug out of the device.
Note:The battery functionality is not enough for a full body treatment.
Cleaning & storage
1 After use, switch o the device, unplug it and let it cool down.
Note: Light exit window and the attachment can become very hot after
usage.
2 Remove the attachment.
3 Moisten the soft cloth supplied with the device with a few drops of water
and use it to clean the following parts:
- the light exit window on the device
- the outside surface of the attachments
- the reector inside the attachments
- the transparent lter glass in the bikini and the precision attachment
- the reddish lter glass inside the facial attachment
- the skin tone sensor window
4 Let all parts air dry thoroughly.
5 Store the device in a dust-free place at a temperature between -25° to
+70°C and a humidity range between 15-90%.
26
English
To Next Page
Loading...
