Selecting the right light intensity
Lumea provides 5 different light intensities. Depending on your skin type
and the light intensity level you find comfortable, you can select the right
light intensity setting.
1 Consult the table below to select the right setting.
2 To adjust the light intensity setting,press the on/off button one or more
times until you have reached the required setting. The corresponding
intensity light lights up white.
Note: Thedevice automatically disables when your skin tone is too dark,
to prevent you from developing skin reactions. The integrated skin tone
sensor does not tell you which light intensity setting to use, as Philips
Lumea gives you the freedom to select the light intensity that you find
most convenient.
3 Lumea should never be painful. If you experience discomfort, reduce the
light intensity setting.
4 After recent tanning, perform a skin test to determine the right light
intensity setting.
Skin type
Skin tone Light intensity setting
I White; You always sunburn, never tan. 4/5
II Beige; You easily sunburn, tan minimally. 4/5
III Light brown; You sunburn easily, tan slowlyto light
brown.
4/5
IV Mid brown; You rarely sunburn, tan easily. 3/4
V Dark brown; You rarely sunburn, tan very easily. You cannot use the device
VI Brownish black or darker; You rarelyor never sunburn,
very dark tanning.
You cannot use the device
Note: To check if your skin type allows usage of the device, consult the skin
tone table with number 2 on the foldout page.
Note:Your skin may react differently on different days/occasions for a
number of reasons.
Handling the device
1 Before use, clean the attachments and the light exit window.
17
English
To Next Page
Loading...
