PCS 104 585
3-3
INSTRUCTIONS FOR USE
Compact Disc
OPEN • CLOSE
SELECT
SOURCE
TIMER
ON • OFF
INTERACTIVE SOUND
STANDBY
ON
REPEAT
RDS
DBB
DSC
PRESETSTOP PLAY•PAUSE
iR SENSOR
VOLUME
INCREDIBLE SURR.
CLOCK
PROGRAM
CD
PROGRAM
SHUFFLE
TUNING
TUNING
RECORD
REV MODE
BAND
SIDE A/B
PREV NEXT
IMPORTANT:
The lens of the CD player should never be
touched.
X
Playing a disc
This CD player plays Audio Discs including CD-
Recordables and CD-Rewritables.
¶ CD-ROM, CD-I, CDV, VCD, DVD or computer
CDs, however, are not possible.
1 Select CD source.
2 Press OPEN•CLOSE on the top
of the system to open the CD
compartment.
‹ OPEN is displayed when you
open the CD compartment.
3 Insert a disc with the printed side
facing up and press down on OPEN•CLOSE
to close the CD door.
‹ READ is displayed as the CD player scans the
contents of a disc, and then the total number of
tracks and playing time are shown.
4 Press PLAY•PAUSE 2; (on the remote
control 2) to start playback.
‹ Current track number and elapsed playing
time of the track are displayed during disc
playback.
5 To interrupt playback press PLAY•PAUSE 2;
(on the remote control SIDE/;). Press
PLAY•PAUSE 2; (on the remote control 2)
again to resume play.
‹ The display freezes and the elapsed playing
time flashes when playback is interrupted.
6 To stop disc playback, press STOP 9.
Note: CD play will also stop when;
– the CD door is opened.
– the disc has reached the end.
– you select another source: TAPE, TUNER or AUX.
Selecting a different track
¶ Press PREV ¡1 or NEXT 2™ on the system,
(on the remote control ¡ or ™) once or
repeatedly until the desired track number
appears in the display.
¶ If you have selected a track number shortly after
loading a disc or in the PAUSE position, you will
need to press PLAY•PAUSE 2; (on the
remote control 2) to start playback.
Finding a passage within a track
1 Press and hold down on PREV ¡1 or NEXT
2™.
‹ The disc is played at high speed and low
volume.
2
When you recognise the passage you want,
release PREV ¡1 or NEXT 2™.
‹ Normal playback continues.
Note:
– During a disc programme or if SHUFFLE/
REPEAT active, searching is only possible within the
same track.
Different play modes: SHUFFLE
and REPEAT
You can select and change the various play
modes before or during playback. The play
modes can also be combined with
PROGRAMME.
SHUFFLE .........tracks of the entire disc/
programme are played in
random order
SHUFFLE and REPEAT ALL…to repeat the
entire disc/ programme
continuously in random order
REPEAT ALL ...repeats the entire disc/
programme
REPEAT............plays the current track
continuously
Compact Disc
1 To select your play mode, press the SHUFFLE
or REPEAT button before or during playback
until the display shows the desired function.
2 Press PLAY•PAUSE 2; (on the remote
control 2) to start playback if in the STOP
position.
‹ If you have selected SHUFFLE, playback starts
automatically.
3 To return to normal playback, press the
respective SHUFFLE or REPEAT button until
the various SHUFFLE/ REPEAT modes are no
longer displayed.
¶ You can also press STOP 9 to cancel your play
mode.
Programming track numbers
Programme in the STOP position to select and
store your disc tracks in the desired sequence. If
you like, store any track more than once. Up to
20 tracks can be stored in the memory.
1 Press PROGRAM on the system or remote
control to enter the programming mode.
‹ A track number is shown and PROGRAM
flashes.
2 Use the PREV ¡1 or NEXT 2™ on the
system, (on the remote control ¡ or ™) to
select your desired track number.
3 Press PROGRAM to confirm the track number
to be stored.
‹ The number of tracks programmed and total
playing time of the programme is shown briefly,
then the selected track and PROG.
4 Repeat steps 2-3 to select and store all desired
tracks.
‹ FULL is displayed if you attempt to
programme more than 20 tracks.
5
To start playback of your disc programme, press
PLAY•PAUSE 2; (on the remote control 2).
Reviewing the programme
In STOP mode, press and hold down
PROGRAM on the system or remote control,
for a while until the display shows all your stored
track numbers in sequence.
Erasing the programme
You can erase the programme by:
¶ pressing STOP 9 once in the STOP mode;
¶ pressing STOP 9 twice during playback;
¶ opening the CD compartment;
‹ PROGRAM disappears from the display.
To Next Page
Loading...
