Philips MC-V320 - Detailed Control Explanations; Main Unit and Remote Control Operations

10
English
MC-V320/21-1
Controls (main system’s illustration on page 3&4)
Controls on the system and
remote control
1 Display
– shows the status of the system.
2 PROG/ REV
for VCD/ CD/ MP3 ...... programmes tracks and
reviews the programme.
for TUNER ........................ programmes tuner
stations manually or
automatically.
for TAPE .............................. sets tape reverse mode
3 CLOCK SET
for CLOCK ....................... set the clock function.
for VCD/ CD/ MP3 ...... starts or interrupts CD
playback
for TAPE .............................. starts the tape playback
4 Mode Selection
VOLUME (-/+)
– adjusts the volume level.
– on the system only - adjusts the hour and minutes
for the clock/timer functions.
PRESET/ TIMER SET / (TITLE –/+)
for TUNER ........................ selects a preset radio
station.
for VCD/ CD/ MP3 ...... skips to the beginning of a
current track/ previous/
subsequent track
................................................. select next or previous
menu
for Timer ( only) to set timer under standby
SEARCH/ TUNE / (ALBUM –/+)
for TUNER ........................ Tune to a station
for VCD/ CD ................... fast searches back and
forward within a track.
for MP3 ............................... ALBUM select.
for TAPE .............................. fast rewind/ wind tape
STOP 9
for VCD/ CD/ MP3 ...... stops VCD/ CD/ MP3
playback or erase a VCD/
CD/ MP3 programme.
for TUNER ........................ stops programming
for TAPE .............................. stops tape playback/
recording.
REC ● ............................... starts recording.
5 SOURCE ●
– selects the respective sound source for CD/
TUNER/ TAPE /AUX.
– switches on the system.
6 DISPLAY-BAND
for TUNER ........................ change the tuner radio
band.(FM/ MW)
for VCD/ CD/ MP3 ...... change the CD display
mode
for TAPE .............................. select tape direction
7 iR SENSOR
– infrared sensor for remote control.
8 STANDBY ON 2
– switches the system to standby.
9 PHONES - connects to headphone.
0 LEVEL (mic)
– to adjust the mixing level for karaoke or
microphone recording.
! MIC
– to connect microphone jack.
@
– open/ close the cassette door.
# CD OPEN
– open the CD door.
$ INTERACTIVE SOUND controls:
DBB .................................... (Dynamic Bass Boost)
enhances the bass.
DSC ..................................... (Digital Sound Control)
selects sound
characteristics: CLASSIC/
JAZZ/ ROCK/ OPTIMAL.
% 2
– to switch the system to Standby mode.
^ DIGIT 0/-- – 9
(numbers consisting more than two or three figures
must be Press & hold 0/--.)
– to select a track number for CD/VCD/MP3-CD.
– to select tuner preset.
& MODE
REPEAT
– repeats a track/ CD programme/ entire CD.
SHUFFLE
– plays CD tracks in random order.