24
English
Dimming the display screen
● Press DIM repeatedly to select different levels of
brightness for the display screen.
Demonstration mode
The system has a demonstration mode that
shows the various features offered by the system.
To activate the demonstration
● In standby mode, press STOP 9 on the system
to activate the demo mode.
➜ Demonstration will begin.
To deactivate the demonstration
● Press STOP 9 on the system again.
➜ “DEMO OFF” is displayed.
Note:
– Even if you remove the AC power cord and
reconnect it to the wall socket, the demonstration
will remain off until you activate it again.
Basic Operations
pg 001-024_MCD908_Eng-37 2007.1.24, 17:5724
To Next Page
Loading...
