Using the appliance
When you trim your beard for the rst time, be careful and test the
appliance on a small part of your arm or leg. Do not move the trimmer
too fast. Make smooth and gentle movements.
If any irritation or allergic reaction occurs, discontinue use immediately.
Do no use the appliance on sensitive or irritated skin.
Trimming with the precision trimming head
With the precision trimming head without trimming comb, you can trim
hairs to a length of 1mm, the so-called ‘stubble look’.
1 Put the precision trimming head on the appliance (see section
‘Attaching and detaching the attachments’ in chapter ‘Preparing for use’).
2 Switch on the appliance.
3 Touch the hairs lightly with the precision trimming head and move it
against the direction of hair growth.
Note: You can use the precision trimming head with the trimmer teeth pointing
towards the skin. You can also use it with the at part touching the skin and
the teeth pointing in the direction in which you move the appliance.
4 Switch off the appliance.
ENGLISH 7
To Next Page
Loading...
