2-2
2-2
1) Remove 4 screws J (see Figure 8) from both side of the
Power Box to loosen the Cabinet Top Power Box (pos
229) and Cabinet Bottom Power Box (pos 230).
Service position A
Service position C
Service position B
DISMANTLING INSTRUCTIONS (CENTRE UNIT) DISMANTLING INSTRUCTIONS (POWER BOX)
Dismantling of the Power Box Cabinet
Figure 8
Figure 9
Figure 10
2) Uncatch C2 (see Figure 9) to separate the Cabinet Front
Power Box (pos 227) and Cabinet Rear Power Box (pos
228) from the chassis.
3) Remove 8 screws K (see Figure 10) to loosen the
Chassis Top of the Power Box (see Service position A for
Power Box).
To Next Page
Loading...
