13
English
Controls on the system and
remote control
1 STANDBY•ON
– to switch the system on or to standby
mode.
– to use for EASY SET.
2 DIGITAL CONTROL – to select the
desired digital sound effect :
INCREDIBLE SURROUND
– to switch on or off the surround sound
effect.
BASS+/-
– to adjust the Bass level.
TREBLE+/-
– to adjust the Treble level.
LOUDNESS
– to switch on or off the loudness sound
effect at low volume level.
3 SOURCE – to select the following:
3 CDC
– to select CD mode. When CD playback
is stopped, press to select the disc
tray 1, 2 or 3.
TUNER
– to select Tuner mode. When in Tuner
mode, press to select the waveband:
FM or AM.
TAPE
– to select Tape mode. When tape
playback is stopped, press to select
either tape deck 1 or 2.
CDR / AUX
– to select sound from an external
source (e.g. TV, VCR, Laser Disc player,
DVD player or CD Recorder). When in
Aux mode, press to select either
AUX/DVD or CDRW.
4 MODE SELECTION
SEARCH / TUNE S T
(PRESET 4 3 )
for CD ............ to search backward/
forward.
...................... to skip to the beginning
of the current, previous,
or next track
(press the
button for less than 0.5
seconds)
.
for TUNER .....
(if PRESET mode is OFF)
to tune to a lower or
higher radio frequency.
......................
(if PRESET mode is ON)
to select a preset
station in memory.
for TAPE ....... to rewind or fast
forward a tape.
PLAY É/Å (A•B)
for CD ............ to start or interrupt
playback.
for TAPE ........ to start playback.
...................... SIDE : when playing in
Tape 2 mode, to change
side.
PRESET
to switch on or off the PRESET mode.
CONTROLS
STOP Ç
for CD ............ to stop CD playback or
to clear a program.
for TUNER ..... to stop programming.
for TAPE ........ to stop playback or
recording.
DEMO ...........
(on the system only)
to
start or stop
demonstration mode.
5 DISPLAY SCREEN
– to view the current setting of the
system.
6 CD CAROUSEL TRAY
7 DISC 1 / DISC 2 / DISC 3
– to select a CD tray for playback.
8 OPEN•CLOSE
– to open or close the CD carousel.
9 DISC CHANGE
– to change CD(s).
0 DIM
– to select 4 different DIM mode on the
display screen, DIM 1, DIM 2, DIM 3
or DIM OFF.
– to reset the tape counter in tape mode
only
(press the button for more than 2
seconds)
.
! PROG / A. REV (PROGRAM / AUTO
REVERSE)
for CD ............ to program CD tracks.
for TUNER ..... to program preset radio
stations.
for TAPE ........ to select the desired
play modes ( å / ç /
∫ ) in tape deck 2
only.
@ REC / CD SYN (RECORD / CD
SYNCHRO)
– to start recording or to synchronize the
CD recording on tape deck 2.
# CLOCK/TIMER
– to view the clock, set the clock or set
the timer.
$ DUBBING NORMAL•FAST
– to dub a tape in normal or fast speed.
% FLAT
– to switch on or off the digital sound
control setting.
^ n
– to connect headphones.
& VOLUME
– to adjust the volume.
* TAPE DECK 2
( TAPE DECK 1
) REPEAT
– to repeat a CD track, a disc, or all the
available discs.
¡ SHUFFLE
– to play all the available discs and their
tracks in random order.
™ SLEEP
– to switch the system to standby mode
at a selected time period.
£ BALANCE L/R
– to balance the sound level of the Front
Left and Right speakers.
≤ MUTE
– to switch off the sound temporarily.
To Next Page
