Philips NC1 - Get Started; Charge Your Headphones

5EN
3 Get started
Charge your headphones
Note
• Beforeyouuseyourheadphonesforthersttime,
charge the battery for 5 hours for optimum battery
capacity and lifetime.
• Use only the original USB charging cable to avoid any
damage.
• You can operate the headphones normally during
charging.
• Normally,afullchargetakes2hours.
• Whenthebatterylevelislow,thewhiteLEDwillash.
Connect the supplied USB charging cable to:
• the micro USB charging port on the
headphones and;
• the charger/USB port of a computer.
» LED turns orange during charging and
turns off when the headset is fully
charged.
» LED turns white when ANC is on.