Philips Norelco 3000 Series - Shaving Head Replacement Procedure

2 Press the shaving unit release button to
open the shaving unit. Pull the shaving unit
off the shaver.
2
1
3 Turn the lock counterclockwise and remove
the retaining frame. Place it aside in a safe
place.
4 Remove the shaving heads from the
shaving unit.
Discard the used shaving heads
immediately to avoid mixing them with the
new shaving heads.
5 Place new shaving heads in the shaving
unit.
Note: Make sure the notches on both sides
of the shaving heads fit exactly onto the
projections in the shaving head holder.
1
2
6 Put the retaining frame back into the
shaving unit and turn the lock clockwise.
17