Philips NORELCO 7700 Series - Trimmer Cleaning and Maintenance; Trimmer Drying and Maintenance Tips; Cleaning the Beard Styler; Beard Styler Cleaning Steps

ENGLISH
4 Turn the shaver OFF. Shake off excess
water and allow trimmer to air dry
thoroughly.
Tip: For optimal trimmer performance, lubricate
the trimmer teeth with one drop of mineral
oil every 6 months.
Cleaning the Beard Styler
Clean the beard styler after each use.
C 1 Pull the comb off the beard styler.
Make sure to grab the comb in the center. Do not
pull at the sides of the comb.
C 2 Rinse the beard styler and comb under
hot water. BUT BE CAREFUL TO TEST
WATER FIRST SO AS NOT TO BURN OR
SCALD HANDS.
3 Shake off excess water and allow beard
styler and comb to air dry thoroughly.
Tip: For optimal performance, lubricate the beard
styler teeth with one drop of mineral
oil every 6 months.
34