ENGLISH20
Shaving Unit: Every Week
We advise you to clean the appliance thoroughly
at least once a week to maintain optimal shaving
performance.
You can also follow this procedure when the
shaving heads have to be cleaned.
1 Switch the razor off.
C
2 Press the Razor Head Release Button
located under razor heads on front side of
Razor.
C
3 Rinse the inside of the Razor Head
Assembly by running under hot water.
Water from the tap should be on a hot
setting,
BUT BE CAREFUL TO TEST WATER FIRST SO AS
NOT TO BURN OR SCALD HANDS.
C
4 Rinse the outside of the Razor Head
Assembly.
C
55 Rinse the hair chamber.
6 Shake off excess water. Close Razor Head
Assembly and shake off excess water.
7 Open the Razor Head Assembly and leave
it open to air dry completely.
To Next Page
Loading...
