Replacing the Shaving Heads
◗ Replace the shaving heads once a year for
optimal shaving results.
◗ Replace damaged or worn shaving heads with
model HQ56 Philips Norelco shaving heads
only.
◗ HQ56 Philips Norelco shaving heads are
available on www.philips.com/store
1 Turn shaver OFF, remove the charging plug
from the outlet and power cord from the
shaver.
C 2 Place your thumb under the shaving unit
and push the shaving unit off the shaver
while holding it in your hand.
C 3 Turn the lock counterclockwise (1) to
unlock and remove the retaining frame (2).
4 Remove the shaving heads and place the
new shaving heads in the shaving unit.
Make sure that the projections of the shaving
head fit exactly into the recesses.
C 5 Put the retaining frame back into the
shaving unit (1) and turn the lock
clockwise until it locks into place (2).
ENGLISH
20
2
1
1
2
To Next Page
Loading...
