-
The SmartClean thoroughly cleans but does
not disinfect your shaver, therefore, do not
share the shaver with others.
-
Place the SmartClean on a flat, stable and
fluid-resistant surface to avoid any leakage.
Be careful not to tip or move the
SmartClean when it is ready for use.
-
Use this product for its intended household
use as described in this manual.
Preparing the SmartClean for use
Caution: Do not tilt the SmartClean to
prevent leakage.
Note: Hold the SmartClean while you prepare
it for use.
1 Put the small plug in the back of
SmartClean.
2 Put the power plug in the wall outlet.
3 While holding SmartClean with one hand,
press the button on the side of SmartClean
and lift the top part of the unit.
4 Pull the seal off the cleaning cartridge.
24
English
To Next Page
Loading...
