5 Place the cleaning cartridge in SmartClean.
6 While holding SmartClean with one hand,
gently push the top part of SmartClean back
down (‘click’).
Using the SmartClean system
Note: If you use the shaver with shaving foam,
shaving gel or pre-shave products, briefly rinse
the shaver with warm water before you clean it
in the SmartClean system.
Caution: Always shake excess water off the
shaver before you place it in the SmartClean
system.
1 Press to open the SmartClean system cap,
to be able to place the shaver in the holder
('click').
2 Hold the shaver upside down above the
holder. Make sure the front of the shaver
points towards the SmartClean system
holder.
25
English
To Next Page
Loading...
