ENGLISH
Using the SmartClick Trimmer
To Groom Sideburns and Moustache
C
1 Pull the shaving unit straight off the shaver.
NOTE: Do not turn the shaving unit while you
pull it off the shaver.
C
2 Insert the raised notch of the SmartClick
trimmer into the slot in the top of the
shaver. Press the trimmer down to attach it
to the shaver. You will hear a ‘click’.
3 Turn shaver ON.
C 4 Hold trimmer to exact hairline desired.
Move trimmer downward with gentle
pressure.
5 Trim beard, moustache or sideburns using
the trimmer.
6 Turn shaver OFF when finished.
7 Thoroughly clean the trimmer (see
‘Cleaning’).
C 8 Pull the trimmer straight off the shaver.
NOTE: Do not turn or twist the trimmer while
you pull it off the shaver.
21
ENGLISH
C 1 Apply some water to your skin.
C 2 Apply shaving foam or gel to your skin.
3 Rinse the shaving unit under the tap
to ensure that the shaving unit glides
smoothly over your skin.
4 Press the on/off button once to switch on
the shaver.
C 5 Move the shaving heads in circular
movements over your skin.
NOTE: Rinse the shaver under the tap regularly
to ensure that it continues to glide smoothly over
your skin.
6 Dry your face and thoroughly clean
the shaver after each use (see chapter
‘Cleaning’).
NOTE: Make sure you rinse all foam or gel off the
shaver.
C
7 Place the shaver in the SmartClean System
to protect heads.
20
To Next Page
Loading...
