EasyManua.ls Logo

Philips OneBlade Pro QP6610 - Charging

Philips OneBlade Pro QP6610
360 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- Never use compressed air,
scouring pads, abrasive
cleaning agents or aggressive
liquids such as petrol or
acetone to clean the appliance.
Electromagnetic fields (EMF)
This Philips appliance complies with all applicable
standards and regulations regarding exposure to
electromagnetic fields.
General
- This appliance is waterproof. It is suitable for
use in the bath or shower and for cleaning
under the tap. For safety reasons, the appliance
can therefore only be used without cord.
- The supply unit is suitable for mains voltages
ranging from 100 to 240 volts.
- The supply unit transforms 100-240 volts to a
safe low voltage of less than 24 volts.
- Maximum noise level: Lc = 75dB(A).
Charging
Charge the appliance before first use and when
the display indicates that the battery is almost
empty.
Charging takes approx. 1 hour.
A fully charged appliance has an operating time of
up to 90 minutes (QP6620) or 60 minutes
(QP6610).
Note: This appliance can only be used without
cord.
9
English

Table of Contents

Related product manuals