Philips PD7015 - Getting Started: Powering On and Standby; Powering the Player On and Off

16 EN
3 Close the battery compartment.
Switch on/off
1
To switch on, slide  to the ON position on the portable DVD
player.
» The CHR indicator turns on (green).
2 To switch off, slide  to the  position on the portable DVD
player.
 Alternatively, press
on the remote control to switch to standby mode.
» The CHR indicator turns on (red).The battery charging starts.
» When the battery is fully charged, the CHR indicator turns off.
Auto standby
In DVB-T mode or USB mode, if there is no button press or media play for three
hours, the player switches to standby mode to save power.
1
2
3