Philips PD9028 - Use the Remote Control (for PD9048 Only)

14 EN
Use the remote control (for PD9048 only)
For rst-time use:
• Remove the protective tab to activate the remote control battery.
To replace the remote control battery:
1 Open the battery compartment.
2 Insert one CR2025 battery with correct polarity (+/-) as indicated.
3 Close the battery compartment.
1
2
3
PD9028_9048_51_UM_V1.0.indb 14 5/11/2012 5:14:07 PM