22 EN
5 Watch TV
Note
• Before you start, ensure that you have connected the antenna to the player.
• Make sure you are in an area with sufcient signal coverage. You can check the signal coverage with
the TV broadcast authority of your country or visit www.philips.com/support.
Connect TV antenna
To watch analog TV programs on the player, connect one of the TV antennas to
the player:
• the supplied antenna, or
• your home antenna.
• Connect the antenna to the ANTENNA jack.
Tip
• For better reception, connect the player to home antenna.
Tune in to TV channels
1 Press SOURCE repeatedly to select the TV mode.
Cable
To Next Page
Loading...
