Philips Professional HFL5014/12 Series - Crestron Connected Wizard; Display Settings

- 116 -
o
When ‘
WPS with PIN code’
is
selected
you will see that you have to enter an 8-
digit WPS PIN in your router as indicated
on the screen.
o Once connected you will get a message
7.10 Crestron Connected wizard
In order to configure the Crestron application, you need to make sure you are connected to the
internet.
In the [Professional Settings][Advanced][Select TV Control App], you need to select [Crestron
Connected] and press “OK” to start the configuration wizard.
7.10.1 Display Settings
o [Name]: the name of the device as it will appear in the different Crestron (control) setups
o [Hostname]: the DNS name of the Display
o [Username]: used for extra security (most of the time together with TLS setup)
o [Password]: used for extra security (most of the time together with the TLS setup)
o [Confirm Password]: used for extra security (most of the time together with the TLS setup)