6
Introduction
www.philips.com/welcome.
the appliance. Save them for future reference.
Product overview (Fig. 1)
1 Steam supply hose
2 Steam trigger/Steam boost
3 ‘Iron ready’ light
4 Soleplate
Iron platform
6 Carry lock release button
Detachable water tank
8 Filling hole
9 Supply hose storage compartment
10 EASY DECALC knob
11 Mains cord with plug
12 EASY DECALC light
13 ‘Water tank empty’ light
14
Preparing for use
Type of water to use
This appliance has been designed to be used with tap water. However, if you live in an area with hard
water, fast scale build-up may occur. Therefore, it is recommended to use distilled or demineralized water
appliance.
Warning: Do not use perfumed water, water from the tumble dryer, vinegar, starch, descaling
agents, ironing aids, chemically descaled water or other chemicals, as they may cause water spitting,
brown staining or damage to your appliance.
Filling the water tank
tank at any time during use.
1
2
3 Push in the top part of the water tank until it locks into place (‘click’) (Fig. 4).
Water tank empty light
and press the steam trigger to let the appliance heat up again. When the ‘iron ready’ light lights up
continuously, you can continue steam ironing.
English
5 / 144 4 / 142 5 / 144
To Next Page
Loading...
