8
Safe rest
Restingtheironwhilerearrangingyourgarment
While rearranging your garment, you can rest the iron either on the iron platform or horizontally on the
board cover.
Energy saving
-
-
Warning: Never leave the appliance unattended when it is connected to the mains. Always unplug
the appliance after use.
Cleaning and maintenance
Descaling the appliance
needs to be descaled. Perform the following EASY DECALC procedure before you continue ironing.
Note: If your water is hard, increase the descaling frequency.
Warning: To avoid the risk of burns, unplug the appliance and let it cool down for at least two hours
1 Remove the plug from the wall socket.
2 Remove the detachable water tank (Fig. 2).
3 Remove the iron from the iron platform.
4 Hold and shake the base of the steam generator (Fig. 16).
5
6 Hold the base of the steam generator over the sink and empty it through the EASY DECALC opening
Note: Be mindful on the heavy weight of the appliance when you tilt it.
7 Reinsert the EASY DECALC knob and turn it clockwise to fasten it (Fig. 19).
8 You can continue using your iron immediately after completing the EASY DECALC procedure.
Descaling the soleplate
If you do not descale your appliance regularly, you may see brown stains coming out of the soleplate due
to scale particles. Descale the soleplate by following the procedure below. We advise you to perform the
procedure twice for better results.
1 Make sure the appliance is cool and clean the soleplate with a damp cloth.
2 Remove the water tank and iron from the iron platform.
3 Remove the EASY DECALC knob and empty the water through the EASY DECALC opening.
4
into the opening via a bottle or cup. (Fig. 20).
English
7 / 144 6 / 142 7 / 144
To Next Page
Loading...
