2 Connect the hair clipper to the mains and wait a few seconds
before you switch it on.
If the batteries are completely empty, wait a few minutes before you
switch on the appliance.
Using the appliance
Make sure your hair is clean and dry. Do not use the appliance on freshly
washed hair.
1 Comb your hair with a styling comb in the direction of hair
growth (Fig. 3).
Clipping with comb attachment
Use the small or large comb attachment, depending on the desired
hair length. The remaining hair length after cutting is indicated in
mm on the comb attachments. The selected hair length setting (1-5)
is shown in the two length setting indication windows on both
sides of the length selector (Fig. 4).
See the table below for an overview of the length settings and the
corresponding hair lengths of each comb attachment.
Small comb Large comb
setting hair length setting hair length
1 3mm/0.12in 1 13mm/0.51in
2 5mm/0.20in 2 15mm/0.59in
3 7mm/0.28in 3 17mm/0.67in
4 9mm/0.35in 4 19mm/0.75in
5 11mm/0.43in 5 21mm/0.83in
1 Slide the comb attachment into the guiding grooves of the
appliance (‘click’) (Fig. 5).
Make sure that the comb attachment has been properly slid into the
grooves on both sides.
,
ENGLISH8
To Next Page
Loading...
