Tips
To clip most effectively, move the appliance
against the hair growth direction.
Since hair grows in different directions, you
need to move the appliance in different
directions as well (upwards, downwards and
across) (Fig. 10).
Make sure that the at part of the comb is
always fully in contact with the scalp to obtain
an even result (Fig. 11).
Make overlapping passes over the head to
ensure that you cut all the hair that needs to
be cut.
6 Regularly remove cut hair from the comb.
If a lot of hair has accumulated in the comb,
remove the comb from the appliance and blow
and/or shake the hair out of it.
Contouring without comb
You can use the appliance without comb to clip
hair very close to the skin (0,5mm) or to contour
the neckline and the area around the ears.
-
-
-
-
ENGLISH
Be careful when you clip without comb because
the cutting element removes every hair it
touches.
1 Pull the comb off the appliance (Fig. 12).
2 Before you start to contour the hairline
around the ears, comb the hair ends over the
ears.
3 Tilt the appliance in such a way that only one
edge of the cutting element touches the hair
ends when you shape the contours around
the ears (Fig. 13).
Only cut the hair ends. The hairline should be close
to the ear.
4 To contour the neckline and sideburns,
turn the appliance and make downward
strokes (Fig. 14).
Move the appliance slowly and smoothly. Follow
the natural hairline.
Cleaning
After every use, clean the appliance with warm
water (max. 40°C).
ENGLISH
To Next Page
Loading...
