EasyManua.ls Logo

Philips QC5390/15 - Cleaning the Cutting Element; Replacement Parts

Philips QC5390/15
36 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
27
Never use compressed air, scouring pads,
abrasive cleaning agents or aggressive liquids such
as petrol, acetone or ethereal oils to clean the
appliance.
Note: The appliance does not need any lubrication.
1 Make sure the appliance is switched off and
disconnected from the mains.
2 Remove the comb from the appliance and
rinse the comb under the tap.
3 Push the centre top end of the cutting
element upwards with your thumb until it
opens (Fig. 15).
4 Clean the appliance under a warm running tap
to ush out the cut hair that has accumulated
under the cutting element (Fig. 16).
Replacement
If the adapter is damaged, always have it replaced
with one of the original type in order to avoid a
hazard.
ENGLISH
Only replace a damaged or worn cutting element
or comb with an original Philips replacement
cutting element or comb.
Philips replacement parts (cutting element, combs,
handle and adapter) are available from your Philips
dealer and authorised Philips service centres.
If you have any difculties obtaining replacement
parts for the appliance, contact the Philips
Consumer Care Centre in your country (you nd
its phone number in the worldwide guarantee
leaet).
Environment
Do not throw away the appliance with the
normal household waste at the end of its life,
but hand it in at an ofcial collection point for
recycling. By doing this, you help to preserve
the environment (Fig. 17).
The built-in rechargeable batteries contain
substances that may pollute the environment.
Always remove the batteries before you
discard and hand in the appliance at an ofcial
collection point. Dispose of the batteries at
an ofcial collection point for batteries. If you
have trouble removing the batteries, you can
-
-
ENGLISH
QC5390_001_034.indd 27 12.6.13 10:54:23 PM

Related product manuals