Extra-thorough cleaning method
Make sure the appliance is switched off.
1 Pull the shaving head holder off the bottom part of the
shaving unit.
2 Slide the green retaining frame in the direction of the
arrows indicated on the retaining frame.
3 Lift the retaining frame out of the shaving head holder.
4 Remove the cutter from the shaving guard.
Note: Do not clean more than one cutter and shaving guard at
a time, since they are all matching sets. If you accidentally put
a cutter in the wrong shaving guard, it may take several weeks
before optimal shaving performance is restored.
5 Clean the cutter with the cleaning brush supplied.
ENGLISH52
To Next Page