7 Put the shaving heads back into the shaving
unit.
8 Put the retaining frame back into the shaving
unit (1) and turn the lock clockwise (2).
9 Insert the lug of the shaving unit into the slot in
the top of the appliance. Then close the shaving
unit ('click').
Note: If the shaving unit does not close
smoothly, check if you have inserted the
shaving heads properly and if the retaining
frame is locked.
Replacement
Replacing the shaving heads
For maximum shaving performance, we advise you
to replace the shaving heads every two years.
Replace damaged shaving heads immediately.
Always replace the shaving heads with original
Philips shaving heads (see 'Ordering accessories').
1 Switch off the appliance and make sure it is
disconnected from the wall socket.
16
English
To Next Page
Loading...
