Thorough cleaning
Clean the shaving heads thoroughly once a month
for optimal performance.
1 Switch off the appliance and make sure it is
disconnected from the wall socket.
2 Press the release button to open the shaving
unit. Pull the shaving unit off the appliance.
3 Turn the lock anticlockwise (1) and remove the
retaining frame (2). Place it aside in a safe place.
4 Remove and clean one shaving head at a time.
Each shaving head consists of a cutter and a
guard.
Note: Do not clean more than one cutter and
guard at a time, since they are all matching sets.
If you accidentally mix up the cutters and
guards, it may take several weeks before
optimal shaving performance is restored.
5 Remove the cutter from the shaving guard and
clean both parts under the tap.
19
English
To Next Page
Loading...
