5 Place new shaving heads in the shaving unit.
Note: Make sure that the shaving heads with
the projections fit exactly onto the hooks of the
shaving head holder when placing them. The
shaving heads supplied with the shaver either
have notches or projections. Both shaving
systems are the same.
6 Put the retaining frame back into the shaving
unit (1) and turn the lock clockwise (2).
7 Insert the hinge of the shaving unit into the slot
in the top of the shaver. Then close the shaving
unit.
Note: If the shaving unit does not close
smoothly, check if you have inserted the
shaving heads properly and if the retaining
frame is locked.
Storage
Put the protection cap on the shaver to prevent
damage.
Note: Always let the shaver dry completely before
storing or before charging in the charging stand.
Storage in pouch (S3232, S3332, S3333 only)
- Store the appliance in the pouch supplied.
- Make sure the appliance is dry before you store
it in the pouch.
Ordering accessories
To buy accessories or spare parts, visit
www.philips.com/parts-and-accessories or go to
22
English
To Next Page
Loading...
