Charging with the power cord
1 Make sure the product is turned off.
2 Put the small plug in the product and
connect the power plug into any 100V to
240V AC outlet. Use only the power cord
provided.
-
The display on the product will indicate the
product is charging.
3 After charging, remove the power plug from
the wall outlet and pull the small plug out of
the product.
Charging with charging stand (S3311 only)
1 Connect the small plug of the cord into the
charging stand. Connect the supply unit into
any 100V to 240V outlet. Use only the
power cord provided.
2 Place the shaver in the stand in an upright
position making sure charging contacts in
the bottom of stand fit into recess in
bottom of the shaver.
-
The display on the shaver will indicate the
shaver is charging.
3 After charging, remove the shaver from the
stand by lifting straight up. Do not tilt the
shaver
Note: An adapter plug may be necessary for
cord usage in some foreign countries. Use an
attachment plug adapter of the proper
configuration for power outlet.
12
English
To Next Page
Loading...
