Thorough cleaning
Clean the shaving heads thoroughly once a month
for optimal performance
Switch off the appliance and make sure it is
disconnected from the wall socket
Press the release button to open the shaving
unit Pull the shaving unit off the appliance
“urn the lock anticlockwise and remove the
retaining frame
Remove and clean one shaving head at a time
Each shaving head consists of a cutter and a
guard
Note Do not clean more than one cutter and
guard at a time since they are all matching sets
If you accidentally mix up the cutters and
guards it may take several weeks before
optimal shaving performance is restored
Remove the cutter from the shaving guard and
clean both parts under the tap
15
English
To Next Page
Loading...
