1 Switch the shaver off.
2 Press the shaving unit release button to open
the shaving unit. Pull the shaving unit off the
shaver.
3 Turn the lock counterclockwise and remove the
retaining frame. Place it aside in a safe place.
4 Remove the shaving heads from the shaving
unit.
Discard the used shaving heads immediately to
avoid mixing them with the new shaving heads.
5 Place new shaving heads in the shaving unit.
Note: Make sure the notches on both sides of
the shaving heads fit exactly onto the
projections in the shaving head holder.
16
English
To Next Page
Loading...
