6 Put the retaining frame back into the shaving
unit and turn the lock clockwise.
7 Insert the lug of the shaving unit into the slot in
the top of the shaver. Then close the shaving
unit.
Note:If the shaving unit does not close
smoothly, check if you have inserted the
shaving heads properly and if the retaining
frame is locked.
8 Press and hold the on/off button for 5 seconds
to reset the replacement reminder on the
shaver. The orange light goes out.
This product has no other user-serviceable parts.
For assistance call 1-800-243-3050.
Storage
Put the protective cap on the shaver to prevent
damage.
Note: Always let the shaver dry completely before
storing.
- Be sure the product is turned off. Remove cord
from outlet and the product before storing it in
a safe, dry location where it will not be crushed,
banged, or subject to damage.
- Do not wrap cord around the product when
storing.
- Store cord and other accessories in a safe
location where these will not be cut or
damaged.
17
English
To Next Page
Loading...
