7 Place the retaining rings back onto the shaving
heads and turn them clockwise to reattach the
retaining rings.
Each retaining ring has two recesses and two
projections that fit exactly in the projections
and recesses of the shaving head holder.
- Turn the ring clockwise until your hear a click to
indicate that the ring is fixed.
Note: Hold the shaving head holder in your
hand when you reinsert the shaving heads and
reattach the retaining rings. Do not place the
shaving head holder on a surface, as this may
cause damage to the shaving heads.
8 Reinsert the hinge of the shaving head holder
into the slot of the shaving unit. Close the
shaving head holder (‘click’).
9 S5230/04, S5210/04 only: To reset the
replacement reminder, press and hold the
on/off button for approx. 7 seconds.
24
English
To Next Page
Loading...
