, While you activate the travel lock, the travel lock
symbol lights up white continuously. When the
travel lock is activated, the travel lock symbol
ashes.
Deactivating the travel lock
1 Press the on/off button for 3 seconds.
, The travel lock symbol ashes and then lights up
continuously.
The shaver is now ready for use again.
Replacing shaving heads
For maximum shaving performance, we advise you
to replace the shaving heads every two years.
- The appliance is equipped with a replacement
reminder which reminds you to replace the
shaving heads. The replacement reminder lights up
white continuously.
Note: After replacing the shaving heads, you need to
reset the shaver by pressing the on/off button for
7 seconds.
’Unplug for use’ reminder
- The appliance is equipped with an ‘unplug for use’
reminder. The ‘unplug for use’ symbol ashes white
to remind you that you have to disconnect the
appliance from the mains.
ENGLISH10
To Next Page
Loading...
