6 Put the shaving heads back into the shaving
head holder.
Note: Make sure the notches on both sides of the
shaving heads t exactly onto the projections in the
shaving-head holder.
7 Place the retaining rings back onto the shaving
head holder (1) and turn them clockwise (2).
Note: Hold the shaving head holder in your hand
when you reinsert the shaving heads and reattach the
retaining rings. Do not place the shaving head holder on
a surface when you do this, as this may cause damage.
8 Reattach the shaving head holder to the
bottom part of the shaving unit.
Cleaning the trimmer attachment
Clean the trimmer attachment every time you have
used it.
1 Switch on the appliance with the trimmer
attachment attached.
2 Rinse the trimmer attachment under a hot tap
for some time.
3 After cleaning, switch off the appliance.
Tip: For optimal trimmer performance, lubricate
the trimmer teeth with a drop of sewing machine oil
every six months.
4 Carefully shake off excess water and let
the trimmer attachment dry.
ENGLISH16
To Next Page
Loading...
