Philips S7886/50 - Cleaning the Nose Trimmer Attachment

51
English
3 Switch on the appliance and rinse the pop-up
trimmer with warm water.
4 After cleaning, switch o the appliance.
5 Carefully shake o excess water and let the
pop-up trimmer air dry.
6 Close the trimmer.
Tip: For optimal performance, lubricate the teeth
of the pop-up trimmer with a drop of mineral oil
every six months (oil not included).
Cleaning the nose trimmer attachment
Clean the nose trimmer attachment every time you
have used it.
1 Make sure the appliance is switched o.
2 Rinse the cutting element with hot water.
3 Switch on the appliance and rinse the cutting
element once more to remove any remaining
hairs. Then switch o the appliance again.
4 Carefully shake o excess water and let the
nose trimmer attachment dry.
Tip: For optimal trimmer performance, lubricate
the trimmer teeth with a drop of sewing machine
oil every six months.